RE: [piclist] WISP 628


Mar 8, 2004

 


----------------------------

#4885 Mar 8, 2004

The WISP628 looks very nice!  Thewebsite does not list the following PICs as programmable with this device – 16F648A16F68816F767 Are any of these supported now or willthey be in the near future? Thanks, Ransom Peek -----Original Message-----

From: Wouter van Ooijen [mailto:wouter@...]

Sent: Monday, March 08, 2004 12:15PM

To: piclist@yahoogroups.com

Subject: RE: [piclist] Needsuggestion for low cost programmer for 28 pin PICs - or can the PICkit1 StarterKit be adapted? > Or, do I need a differentprogrammer, and if so, could someone offer a suggestion? 

 

Dunno if you need one,but if you do you might consider my www.voti.nl/wisp628

 

 

Wouter van Ooijen



---------------

Van Ooijen Technische Informatica: www.voti.nl

consultancy, development, PICmicro products

 





tounsubscribe, go to www.yahoogroups.comand follow the instructions



----------------------------

#4886 Mar 8, 2004

16F648A is supported (and can also be used as PIC in the programmeritself instead of the 16F628(a)), but might need a newer xwisp.py file than theone on my website. I can send it if you want it. The other two willprobably be supported as soon as I have some time and a sample (I might evenhave one lying around).  Wouter van Ooijen

-----------------Van Ooijen TechnischeInformatica: www.voti.nlconsultancy, development, PICmicroproducts 

  

-----Original Message-----From: ransom peek[mailto:ransom.peek@...] Sent: Monday, March 08, 2004 10:22PMTo: piclist@yahoogroups.comSubject: [piclist] WISP628

The WISP628 looksvery nice!  The website does not list the following PICs as programmablewith this device – 16F648A16F68816F767 Are any of thesesupported now or will they be in the near future? Thanks, RansomPeek -----OriginalMessage-----From: Wouter vanOoijen [mailto:wouter@...] Sent: Monday, March 08, 2004 12:15PMTo:piclist@yahoogroups.comSubject: RE: [piclist] Need suggestionfor low cost programmer for 28 pin PICs - or can the PICkit1 Starter Kit beadapted? > Or, do I need a differentprogrammer, and if so, could someone offer a suggestion? 

 

Dunno ifyou need one, but if you do you might consider my www.voti.nl/wisp628

 

 

Wouter van Ooijen

-----------------Van Ooijen TechnischeInformatica: www.voti.nlconsultancy, development, PICmicroproducts 



to unsubscribe, go towww.yahoogroups.com and followthe instructions





tounsubscribe, go to www.yahoogroups.com and followthe instructions



----------------------------

#4890 Mar 8, 2004

That’s great.  I’mheading to your website again now to better understand the WISP 628. Thank you. Ransom Peek -----Original Message-----

From: Wouter van Ooijen[mailto:wouter@...]

Sent: Monday, March 08, 2004 2:28PM

To: piclist@yahoogroups.com

Subject: RE: [piclist] WISP 628 16F648A is supported (andcan also be used as PIC in the programmer itself instead of the 16F628(a)), butmight need a newer xwisp.py file than the one on my website. I can send it ifyou want it. The other two will probably be supported as soon as I have sometime and a sample (I might even have one lying around).

 

Wouter vanOoijen



---------------

Van Ooijen Technische Informatica: www.voti.nl

consultancy, development, PICmicro products

 

 

 

-----OriginalMessage-----

From: ransom peek[mailto:ransom.peek@...]

Sent: Monday, March 08, 2004 10:22PM

To: piclist@yahoogroups.com

Subject: [piclist] WISP 628The WISP628 looks verynice!  The website does not list the following PICs as programmable withthis device – 16F648A16F68816F767 Are any of thesesupported now or will they be in the near future? Thanks, Ransom Peek -----Original Message-----

From: Wouter van Ooijen[mailto:wouter@...]

Sent: Monday, March 08, 2004 12:15PM

To: piclist@yahoogroups.com

Subject: RE: [piclist] Needsuggestion for low cost programmer for 28 pin PICs - or can the PICkit1 StarterKit be adapted? > Or, do I need a differentprogrammer, and if so, could someone offer a suggestion? 

 

Dunno ifyou need one, but if you do you might consider my www.voti.nl/wisp628

 

 

Wouter van Ooijen



---------------

Van Ooijen Technische Informatica: www.voti.nl

consultancy, development, PICmicro products

 





to unsubscribe, go to www.yahoogroups.com and follow theinstructions







tounsubscribe, go to www.yahoogroups.comand follow the instructions





tounsubscribe, go to www.yahoogroups.comand follow the instructions


S
e
n
i
o
r
T
u
b
e
.
o
r
g