AW: AW: AW: AW: [multipsk] ACARS reception using RTL2382 dongle and Multipsk


Mar 19, 2013

 


----------------------------

#16101 Mar 19, 2013

^you have system sounds???



I switched all sounds off ... beter to be safe



Dg9bfc



Sigi



> -----Urspr.ngliche Nachricht-----

> Von: multipsk@yahoogroups.com [mailto:multipsk@yahoogroups.com] Im Auftrag

> von F-14314

> Gesendet: Montag, 18. M.rz 2013 09:26

> An: multipsk@yahoogroups.com

> Betreff: Re: AW: AW: AW: [multipsk] ACARS reception using RTL2382 dongle

> and Multipsk

>

>

>

> Just my 2 cents.

>

> The " disavantage " of using stereomix is that ALL sounds play from the

> system would go though it, but yes it works...

> Using VAC is better forme, found it more sensitive.

>

> Thierry

>

> Dans le mel suivant, siegfried jackstien a .crit:

>

>

>

>

>

> .Stereomix can be made available in win7 ... you have to "show

> disabled

> .devices" and then enable stereomix

>

> .Maybe you have to update your soundcard driver ... but I have NEVER

> seen any

> .setup were you can not add stereomix

>

> .So many useful things come to mind when using stereomix

>

> .Dg9bfc

>

> .sigi

>

> .> -----Urspr.ngliche Nachricht-----

> .> Von: multipsk@yahoogroups.com mailto:multipsk%40yahoogroups.com>

> [ mailto:multipsk@yahoogroups.com mailto:multipsk@yahoogroups.com> ] Im

> Auftrag

> .> von Mike Simpson

> .> Gesendet: Samstag, 16. M.rz 2013 10:21

> .> An: multipsk@yahoogroups.com mailto:multipsk%40yahoogroups.com>

> .> Betreff: Re: AW: AW: [multipsk] ACARS reception using RTL2382

> dongle and

> .> Multipsk

> .>

> .>

> .>

> .> For Sigi and Dick,

> .>

> .> Many thanks, that was indeed the problem, I was trying to change

> audio

> .> with the software running.

> .>

> .> By the way, I use Windows 7, so there is no stereomix option -

> However

> .> using VAC works fine and allows a lot of flexibility.

> .>

> .> Regards, Mike Simpson

> .> Penrith, NSW, Australia

> .> www.rstools.info

> .>

> .>

> .>

> .> ------ Original Message ------

> .> From: "siegfried jackstien" siegfried.jackstien@...

> mailto:siegfried.jackstien%40freenet.de> >

> .> To: multipsk@yahoogroups.com mailto:multipsk%40yahoogroups.com>

> .> Sent: 16/03/2013 7:28:20 PM

> .> Subject: AW: AW: [multipsk] ACARS reception using RTL2382 dongle

> and

> .> Multipsk

> .>

> .>

> .>

> .> Hello Mke

> .>

> .> In sdrsharp the soundcard is greyed out when the soft is running

> .> (you can

> .> not change soundcard while in use)

> .>

> .> If you press stop the sc selection is NOT greyed out

> .>

> .> Thzere is no need to use vac (in mnost systems)...

> .>

> .> I use "stereomix" as recording input device in windows ... now all

> .> soft that

> .> normally takes audio from soundcard gets its audio from the

> speaker

> .> out

> .> signal ...

> .>

> .> That works here with ANY sdr soft and with ANY digital decoding

> .> software

> .>

> .> So ... no need to use vac (even if you now know how to change sc

> .> setting in

> .> sdr#)

> .>

> .> Dg9bfc

> .>

> .> Sigi

> .>

> .> > -----Urspr.ngliche Nachricht-----

> .> > Von: mailto:multipsk%40yahoogroups.com

> mailto:multipsk@yahoogroups.com>

> .> [ mailto:mailto:multipsk%40yahoogroups.com

> mailto:mailto:multipsk@yahoogroups.com> ] Im Auftrag

> .> > von Mike Simpson

> .> > Gesendet: Samstag, 16. M.rz 2013 02:36

> .> > An: mailto:multipsk%40yahoogroups.com

> mailto:multipsk@yahoogroups.com>

> .> > Betreff: Re: AW: [multipsk] ACARS reception using RTL2382 dongle

> .> and

> .> > Multipsk

> .> >

> .> >

> .> >

> .> > I see you mention using a RTL2382 dongle with SDR# and sending

> the

> .> sound

> .> > via a Virtual Audio Cable.

> .> >

> .> > I have recently purchased a RTL2382 dongle with E4000 tuner and

> .> set it up

> .> > using the latest version of SDR# which works OK, however the

> .> option for

> .> > the output audio is always greyed out and set to Microsoft

> Sound,

> .> so I

> .> > can't use it with Virtual audio cable. Do you know of a version

> .> where the

> .> > output soundcard can be changed?

> .> >

> .> > However, I have set it up using HDSDR and am receiving VHF ACARS

> .> with no

> .> > problems, sending the output via VAC and decoding with MultiPSK,

> .> then

> .> > sending the output to my Display-Launcher program.

> .> >

> .> > So all in all, a nice cheap ACARS output system with the dongle

> .> only

> .> > costing $17 from a Hong Kong supplier, post free...

> .> >

> .> > Regards, Mike Simpson

> .> > Penrith, NSW, Australia

> .> > www.rstools.info

> .> >

> .> >

> .> >

> .> > ------ Original Message ------

> .> > From: "siegfried jackstien"

> .> mailto:siegfried.jackstien%40freenet.de

> mailto:siegfried.jackstien@...> >

> .> > To: mailto:multipsk%40yahoogroups.com

> mailto:multipsk@yahoogroups.com>

> .> > Sent: 19/01/2013 9:23:48 AM

> .> > Subject: AW: [multipsk] ACARS reception using RTL2382 dongle and

> .> Multipsk

> .> >

> .> >

> .> >

> .> > Rtl dongle tuned to 1090

> .> >

> .> > Rtl1090 driver sets frequency and sends raw data via tcp to

> other

> .> > software

> .> >

> .> > All is straight forward

> .> >

> .> > You either can use adsb# ... or rtl1090 ... both work together

> .> with

> .> > virtual

> .> > radar server

> .> >

> .> > www.virtualradarserver.co.uk/

> www.virtualradarserver.co.uk/>

> .> >

> .> > dg9bfc

> .> >

> .> > sigi

> .> >

> .> >

> .> >

> .> >

> .>

> .>

> .>

> .>

>

>

>

>






S
e
n
i
o
r
T
u
b
e
.
o
r
g