Re: [MaxImDL] Re: Remote Guide Head image acquired, now what?


Nov 29, 2010

 


----------------------------

#43704 Nov 29, 2010

OK, so I found the pull-down menu in the Expose tab of the Camera Control module and selected the "focus guide" option. The download from the RGH was a bunch of striped lines and op-art dots. What's the problem here?

--- In MaxImDL@yahoogroups.com, "Ted" cb245er@...> wrote:

>

> I don't know if this has been answered. I searched and couldn't find anything, so here goes.

>

> I installed a RGH and use the SBIG/AO config. In MaxIm 4, when the program downloads an image from the guiding chip, the image from the guiding chip shows up in the locate window and the main program window (just like an image taken with the imaging chip). In MaxIm 5, the guide chip image is not displayed in the main window. Is there an option to display the guide chip image in the main window?

>



----------------------------

#43705 Nov 29, 2010

Maybe I am just flat out missing something, but why are you using an RGH with an AO at the same time?

I use an RGH with a refractor that certainly needs no AO and an AO on a large SCT which does not need the RGH since there is no guide scope in use.. So, for me, it's either/or, but not both.



Mark

--- On Mon, 11/29/10, Ted cb245er@...> wrote:



From: Ted cb245er@...>

Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?

To: MaxImDL@yahoogroups.com

Date: Monday, November 29, 2010, 5:58 PM















.



















OK, so I found the pull-down menu in the Expose tab of the Camera Control module and selected the "focus guide" option. The download from the RGH was a bunch of striped lines and op-art dots. What's the problem here?







--- In MaxImDL@yahoogroups.com, "Ted" cb245er@...> wrote:



>



> I don't know if this has been answered. I searched and couldn't find anything, so here goes.



>



> I installed a RGH and use the SBIG/AO config. In MaxIm 4, when the program downloads an image from the guiding chip, the image from the guiding chip shows up in the locate window and the main program window (just like an image taken with the imaging chip). In MaxIm 5, the guide chip image is not displayed in the main window. Is there an option to display the guide chip image in the main window?



>













































[Non-text portions of this message have been removed]



----------------------------

#43706 Nov 29, 2010

I use an OAG to place the guiding camera in front of the filters.

--- In MaxImDL@yahoogroups.com, Mark Acker markacker@...> wrote:

>

> Maybe I am just flat out missing something, but why are you using an RGH with an AO at the same time?

> I use an RGH with a refractor that certainly needs no AO and an AO on a large SCT which does not need the RGH since there is no guide scope in use... So, for me, it's either/or, but not both.

>

> Mark

>

> --- On Mon, 11/29/10, Ted cb245er@...> wrote:

>

> From: Ted cb245er@...>

> Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?

> To: MaxImDL@yahoogroups.com

> Date: Monday, November 29, 2010, 5:58 PM

>

>

>

>

>

>

>

> ..

>

>

>

>

>

>

>

>

>

> OK, so I found the pull-down menu in the Expose tab of the Camera Control module and selected the "focus guide" option. The download from the RGH was a bunch of striped lines and op-art dots. What's the problem here?

>

>

>

> --- In MaxImDL@yahoogroups.com, "Ted" cb245er@> wrote:

>

> >

>

> > I don't know if this has been answered. I searched and couldn't find anything, so here goes.

>

> >

>

> > I installed a RGH and use the SBIG/AO config. In MaxIm 4, when the program downloads an image from the guiding chip, the image from the guiding chip shows up in the locate window and the main program window (just like an image taken with the imaging chip). In MaxIm 5, the guide chip image is not displayed in the main window. Is there an option to display the guide chip image in the main window?

>

> >

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

> [Non-text portions of this message have been removed]

>



----------------------------

#43707 Nov 29, 2010

I see.. Interesting, I hadn't thought of that.. Interesting for narrowband applications.. Wow, I gotta try this.

Sorry, I wish I had a suggestion for the issue you are experiencing.

--- On Mon, 11/29/10, Ted cb245er@...> wrote:



From: Ted cb245er@...>

Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?

To: MaxImDL@yahoogroups.com

Date: Monday, November 29, 2010, 9:36 PM















.



















I use an OAG to place the guiding camera in front of the filters.







--- In MaxImDL@yahoogroups.com, Mark Acker markacker@...> wrote:



>



> Maybe I am just flat out missing something, but why are you using an RGH with an AO at the same time?



> I use an RGH with a refractor that certainly needs no AO and an AO on a large SCT which does not need the RGH since there is no guide scope in use... So, for me, it's either/or, but not both.



>



> Mark



>



> --- On Mon, 11/29/10, Ted cb245er@...> wrote:



>



> From: Ted cb245er@...>



> Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?



> To: MaxImDL@yahoogroups.com



> Date: Monday, November 29, 2010, 5:58 PM



>



>



>



>



>



>



>



> ..



>



>



>



>



>



>



>



>



>



> OK, so I found the pull-down menu in the Expose tab of the Camera Control module and selected the "focus guide" option. The download from the RGH was a bunch of striped lines and op-art dots. What's the problem here?



>



>



>



> --- In MaxImDL@yahoogroups.com, "Ted" cb245er@> wrote:



>



> >



>



> > I don't know if this has been answered. I searched and couldn't find anything, so here goes.



>



> >



>



> > I installed a RGH and use the SBIG/AO config. In MaxIm 4, when the program downloads an image from the guiding chip, the image from the guiding chip shows up in the locate window and the main program window (just like an image taken with the imaging chip). In MaxIm 5, the guide chip image is not displayed in the main window. Is there an option to display the guide chip image in the main window?



>



> >



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



> [Non-text portions of this message have been removed]



>













































[Non-text portions of this message have been removed]







----------------------------

#43708 Nov 29, 2010

This configuration allows me to use my AO-8 (placed between the OAG/RGH and the rear cell of my C-11) and makes finding and acquiring a guide star easier.

--- In MaxImDL@yahoogroups.com, Mark Acker markacker@...> wrote:

>

> I see... Interesting, I hadn't thought of that... Interesting for narrowband applications... Wow, I gotta try this.

> Sorry, I wish I had a suggestion for the issue you are experiencing.

>

> --- On Mon, 11/29/10, Ted cb245er@...> wrote:

>

> From: Ted cb245er@...>

> Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?

> To: MaxImDL@yahoogroups.com

> Date: Monday, November 29, 2010, 9:36 PM

>

>

>

>

>

>

>

> ..

>

>

>

>

>

>

>

>

>

> I use an OAG to place the guiding camera in front of the filters.

>

>

>

> --- In MaxImDL@yahoogroups.com, Mark Acker markacker@> wrote:

>

> >

>

> > Maybe I am just flat out missing something, but why are you using an RGH with an AO at the same time?

>

> > I use an RGH with a refractor that certainly needs no AO and an AO on a large SCT which does not need the RGH since there is no guide scope in use..... So, for me, it's either/or, but not both.

>

> >

>

> > Mark

>

> >

>

> > --- On Mon, 11/29/10, Ted cb245er@> wrote:

>

> >

>

> > From: Ted cb245er@>

>

> > Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?

>

> > To: MaxImDL@yahoogroups.com

>

> > Date: Monday, November 29, 2010, 5:58 PM

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> > ....

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> > OK, so I found the pull-down menu in the Expose tab of the Camera Control module and selected the "focus guide" option. The download from the RGH was a bunch of striped lines and op-art dots. What's the problem here?

>

> >

>

> >

>

> >

>

> > --- In MaxImDL@yahoogroups.com, "Ted" cb245er@> wrote:

>

> >

>

> > >

>

> >

>

> > > I don't know if this has been answered. I searched and couldn't find anything, so here goes.

>

> >

>

> > >

>

> >

>

> > > I installed a RGH and use the SBIG/AO config. In MaxIm 4, when the program downloads an image from the guiding chip, the image from the guiding chip shows up in the locate window and the main program window (just like an image taken with the imaging chip). In MaxIm 5, the guide chip image is not displayed in the main window. Is there an option to display the guide chip image in the main window?

>

> >

>

> > >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> > [Non-text portions of this message have been removed]

>

> >

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

> [Non-text portions of this message have been removed]

>



----------------------------

#43711 Nov 30, 2010

I don't know if that configuration would work. After I got the 8XME I sold off my AO-7 and upgraded to the AO-8 so I could take advantage of the I2C port on the camera. I think I get better results with the AO-8 (tighter stars, less backfocus). I recently completed my set of narrow band filters and got the RGH to improve my chances of acquiring guide stars when imaging through the narrow band filters (or even the green and blue filters as well). I think v 5 is going to take some getting used to. I know it's been out for a while and others have more experience with it. I was very comfortable with v 4 but I needed RGH support. I'm going to need lots more practice with v 5 before I'm proficient. I still can't figure out how to get the RGH image to appear in the main view window. It's not a major issue, but compared with the way v 4 automatically displayed it, it's an annoyance.

--- In MaxImDL@yahoogroups.com, Mark Acker markacker@...> wrote:

>

> That makes perfect sense... The reason I did not consider this is that I pretty much have to use a particular reducer setup for the AO-7 because of its distance requirements... I may not be able to get the setup going because of that... The AO-7 is kinda fickle.

>

> --- On Mon, 11/29/10, Ted cb245er@...> wrote:

>

> From: Ted cb245er@...>

> Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?

> To: MaxImDL@yahoogroups.com

> Date: Monday, November 29, 2010, 10:03 PM

>

>

>

>

>

>

>

> ..

>

>

>

>

>

>

>

>

>

> This configuration allows me to use my AO-8 (placed between the OAG/RGH and the rear cell of my C-11) and makes finding and acquiring a guide star easier.

>

>

>

> --- In MaxImDL@yahoogroups.com, Mark Acker markacker@> wrote:

>

> >

>

> > I see..... Interesting, I hadn't thought of that..... Interesting for narrowband applications..... Wow, I gotta try this.

>

> > Sorry, I wish I had a suggestion for the issue you are experiencing.

>

> >

>

> > --- On Mon, 11/29/10, Ted cb245er@> wrote:

>

> >

>

> > From: Ted cb245er@>

>

> > Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?

>

> > To: MaxImDL@yahoogroups.com

>

> > Date: Monday, November 29, 2010, 9:36 PM

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> > ....

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> > I use an OAG to place the guiding camera in front of the filters.

>

> >

>

> >

>

> >

>

> > --- In MaxImDL@yahoogroups.com, Mark Acker markacker@> wrote:

>

> >

>

> > >

>

> >

>

> > > Maybe I am just flat out missing something, but why are you using an RGH with an AO at the same time?

>

> >

>

> > > I use an RGH with a refractor that certainly needs no AO and an AO on a large SCT which does not need the RGH since there is no guide scope in use.......... So, for me, it's either/or, but not both.

>

> >

>

> > >

>

> >

>

> > > Mark

>

> >

>

> > >

>

> >

>

> > > --- On Mon, 11/29/10, Ted cb245er@> wrote:

>

> >

>

> > >

>

> >

>

> > > From: Ted cb245er@>

>

> >

>

> > > Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?

>

> >

>

> > > To: MaxImDL@yahoogroups.com

>

> >

>

> > > Date: Monday, November 29, 2010, 5:58 PM

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > > .........

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > > OK, so I found the pull-down menu in the Expose tab of the Camera Control module and selected the "focus guide" option. The download from the RGH was a bunch of striped lines and op-art dots. What's the problem here?

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > > --- In MaxImDL@yahoogroups.com, "Ted" cb245er@> wrote:

>

> >

>

> > >

>

> >

>

> > > >

>

> >

>

> > >

>

> >

>

> > > > I don't know if this has been answered. I searched and couldn't find anything, so here goes.

>

> >

>

> > >

>

> >

>

> > > >

>

> >

>

> > >

>

> >

>

> > > > I installed a RGH and use the SBIG/AO config. In MaxIm 4, when the program downloads an image from the guiding chip, the image from the guiding chip shows up in the locate window and the main program window (just like an image taken with the imaging chip). In MaxIm 5, the guide chip image is not displayed in the main window. Is there an option to display the guide chip image in the main window?

>

> >

>

> > >

>

> >

>

> > > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > >

>

> >

>

> > > [Non-text portions of this message have been removed]

>

> >

>

> > >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> >

>

> > [Non-text portions of this message have been removed]

>

> >

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

> [Non-text portions of this message have been removed]

>







----------------------------

#43712 Nov 30, 2010

I do most of my imaging with a refractor, but figured I would try the AO-7 with the SCT since I got it at a pretty good price.. It's really just more tinkering than anything else.. I figured that if I could get reasonable results, it would be a reason to move to a larger RC. down the road.. I have gotten to the point now where I can get about 30 minutes worth of subs before things start to cave in..

I have been more preoccupied with FocusMax on the refractor lately and have not messed with the setup at all lately.. I also have yet to even attempt narrowband with it.. I have a feeling that won't go well. ;)

--- On Tue, 11/30/10, Ted cb245er@...> wrote:



From: Ted cb245er@...>

Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?

To: MaxImDL@yahoogroups.com

Date: Tuesday, November 30, 2010, 6:08 PM















.



















I don't know if that configuration would work. After I got the 8XME I sold off my AO-7 and upgraded to the AO-8 so I could take advantage of the I2C port on the camera. I think I get better results with the AO-8 (tighter stars, less backfocus). I recently completed my set of narrow band filters and got the RGH to improve my chances of acquiring guide stars when imaging through the narrow band filters (or even the green and blue filters as well). I think v 5 is going to take some getting used to. I know it's been out for a while and others have more experience with it. I was very comfortable with v 4 but I needed RGH support. I'm going to need lots more practice with v 5 before I'm proficient. I still can't figure out how to get the RGH image to appear in the main view window. It's not a major issue, but compared with the way v 4 automatically displayed it, it's an annoyance.







--- In MaxImDL@yahoogroups.com, Mark Acker markacker@...> wrote:



>



> That makes perfect sense... The reason I did not consider this is that I pretty much have to use a particular reducer setup for the AO-7 because of its distance requirements... I may not be able to get the setup going because of that... The AO-7 is kinda fickle.



>



> --- On Mon, 11/29/10, Ted cb245er@...> wrote:



>



> From: Ted cb245er@...>



> Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?



> To: MaxImDL@yahoogroups.com



> Date: Monday, November 29, 2010, 10:03 PM



>



>



>



>



>



>



>



> ..



>



>



>



>



>



>



>



>



>



> This configuration allows me to use my AO-8 (placed between the OAG/RGH and the rear cell of my C-11) and makes finding and acquiring a guide star easier.



>



>



>



> --- In MaxImDL@yahoogroups.com, Mark Acker markacker@> wrote:



>



> >



>



> > I see..... Interesting, I hadn't thought of that..... Interesting for narrowband applications..... Wow, I gotta try this.



>



> > Sorry, I wish I had a suggestion for the issue you are experiencing.



>



> >



>



> > --- On Mon, 11/29/10, Ted cb245er@> wrote:



>



> >



>



> > From: Ted cb245er@>



>



> > Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?



>



> > To: MaxImDL@yahoogroups.com



>



> > Date: Monday, November 29, 2010, 9:36 PM



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> > ....



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> > I use an OAG to place the guiding camera in front of the filters.



>



> >



>



> >



>



> >



>



> > --- In MaxImDL@yahoogroups.com, Mark Acker markacker@> wrote:



>



> >



>



> > >



>



> >



>



> > > Maybe I am just flat out missing something, but why are you using an RGH with an AO at the same time?



>



> >



>



> > > I use an RGH with a refractor that certainly needs no AO and an AO on a large SCT which does not need the RGH since there is no guide scope in use.......... So, for me, it's either/or, but not both.



>



> >



>



> > >



>



> >



>



> > > Mark



>



> >



>



> > >



>



> >



>



> > > --- On Mon, 11/29/10, Ted cb245er@> wrote:



>



> >



>



> > >



>



> >



>



> > > From: Ted cb245er@>



>



> >



>



> > > Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?



>



> >



>



> > > To: MaxImDL@yahoogroups.com



>



> >



>



> > > Date: Monday, November 29, 2010, 5:58 PM



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > > .........



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > > OK, so I found the pull-down menu in the Expose tab of the Camera Control module and selected the "focus guide" option. The download from the RGH was a bunch of striped lines and op-art dots. What's the problem here?



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > > --- In MaxImDL@yahoogroups.com, "Ted" cb245er@> wrote:



>



> >



>



> > >



>



> >



>



> > > >



>



> >



>



> > >



>



> >



>



> > > > I don't know if this has been answered. I searched and couldn't find anything, so here goes.



>



> >



>



> > >



>



> >



>



> > > >



>



> >



>



> > >



>



> >



>



> > > > I installed a RGH and use the SBIG/AO config. In MaxIm 4, when the program downloads an image from the guiding chip, the image from the guiding chip shows up in the locate window and the main program window (just like an image taken with the imaging chip). In MaxIm 5, the guide chip image is not displayed in the main window. Is there an option to display the guide chip image in the main window?



>



> >



>



> > >



>



> >



>



> > > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > >



>



> >



>



> > > [Non-text portions of this message have been removed]



>



> >



>



> > >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> >



>



> > [Non-text portions of this message have been removed]



>



> >



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



> [Non-text portions of this message have been removed]



>













































[Non-text portions of this message have been removed]







----------------------------

#43715 Dec 1, 2010

Also, you may want to image in Narrowband, when an OAG with RGH would be

essential.



Barry --- In MaxImDL@yahoogroups.com, Mark Acker markacker@...> wrote:

>

> Maybe I am just flat out missing something, but why are you using an

RGH with an AO at the same time?

> I use an RGH with a refractor that certainly needs no AO and an AO on

a large SCT which does not need the RGH since there is no guide scope in

use.. So, for me, it's either/or, but not both.

>

> Mark

>

> --- On Mon, 11/29/10, Ted cb245er@... wrote:

>

> From: Ted cb245er@...

> Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?

> To: MaxImDL@yahoogroups.com

> Date: Monday, November 29, 2010, 5:58 PM

>

>

>

>

>

>

>

> .

>

>

>

>

>

>

>

>

>

> OK, so I found the pull-down menu in the Expose tab of the Camera

Control module and selected the "focus guide" option. The download from

the RGH was a bunch of striped lines and op-art dots. What's the problem

here?

>

>

>

> --- In MaxImDL@yahoogroups.com, "Ted" cb245er@ wrote:

>

> >

>

> > I don't know if this has been answered. I searched and couldn't find

anything, so here goes.

>

> >

>

> > I installed a RGH and use the SBIG/AO config. In MaxIm 4, when the

program downloads an image from the guiding chip, the image from the

guiding chip shows up in the locate window and the main program window

(just like an image taken with the imaging chip). In MaxIm 5, the guide

chip image is not displayed in the main window. Is there an option to

display the guide chip image in the main window?

>

> >

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

> [Non-text portions of this message have been removed]

>



----------------------------

#43716 Dec 1, 2010

Yep, I think you are exactly right and I had not thought about that situation.. I am not as far along imaging with the SCT as I am with the refractor and had not considered this.. Funny thing is that I have a decent OAG, I just haven't gotten to point of using it yet.. I actually think I may not be able to since I have an AO-7.. It's so finicky about its distance requirements that I may have to move to an AO-8 before I can.. (Yet another) project for down the road a bit.



Thanks Barry,

Mark

--- On Wed, 12/1/10, Barry Morton barry.morton@...> wrote:



From: Barry Morton barry.morton@...>

Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?

To: MaxImDL@yahoogroups.com

Date: Wednesday, December 1, 2010, 7:49 AM















.























Also, you may want to image in Narrowband, when an OAG with RGH would be



essential.







Barry



--- In MaxImDL@yahoogroups.com, Mark Acker markacker@...> wrote:



>



> Maybe I am just flat out missing something, but why are you using an



RGH with an AO at the same time?



> I use an RGH with a refractor that certainly needs no AO and an AO on



a large SCT which does not need the RGH since there is no guide scope in



use.. So, for me, it's either/or, but not both.



>



> Mark



>



> --- On Mon, 11/29/10, Ted cb245er@... wrote:



>



> From: Ted cb245er@...



> Subject: [MaxImDL] Re: Remote Guide Head image acquired, now what?



> To: MaxImDL@yahoogroups.com



> Date: Monday, November 29, 2010, 5:58 PM



>



>



>



>



>



>



>



> .



>



>



>



>



>



>



>



>



>



> OK, so I found the pull-down menu in the Expose tab of the Camera



Control module and selected the "focus guide" option. The download from



the RGH was a bunch of striped lines and op-art dots. What's the problem



here?



>



>



>



> --- In MaxImDL@yahoogroups.com, "Ted" cb245er@ wrote:



>



> >



>



> > I don't know if this has been answered. I searched and couldn't find



anything, so here goes.



>



> >



>



> > I installed a RGH and use the SBIG/AO config. In MaxIm 4, when the



program downloads an image from the guiding chip, the image from the



guiding chip shows up in the locate window and the main program window



(just like an image taken with the imaging chip). In MaxIm 5, the guide



chip image is not displayed in the main window. Is there an option to



display the guide chip image in the main window?



>



> >



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



>



> [Non-text portions of this message have been removed]



>













































[Non-text portions of this message have been removed]







Contact Us
This Site's Privacy Policy
Google's privacy policies

S
e
n
i
o
r
T
u
b
e
.
o
r
g