#28218 Apr 23, 2007
i had the same issue using a Losmandy GM11 and the SXV-H9C on
Before the update (4.58) of Maxim/DL all was Ok (4.57
- 4.56). I have not tried to use the
previous version to check if
the issue is still present.
apr-2007 7.17 AM
Ogg: Re: [MaxImDL]
At 10:31 PM 4/22/2007, Rich Hammar wrote: >I use
Maxim DL with a Paramount ME mount. Last night I was unable to >get the
autoguider to work. At the end of the calibrate routine, I >would get a
message that the star moved less than 5 pixels. I noted the >Y axis
number was not moving more than one unit during the entire >calibrate
procedure. The X axis worked fine. I adjusted the >aggressiveness,
calibrate times, etc. but nothing would cause the Y >axis to move. I
have had this same problme in the past on occasion. I >have reviewed
the manual, and cannot find an answer.
I'd carefully clean the
contacts of the guider port on the ME and if
you still have problems,
I'd suspect the cable.