#8399 Sep 21, 2003
--- In MaxImDL@yahoogroups.co
wrote: > Chris wrote:
> > I am upgrading to colour by possibly buying a SXV-9C camera(one
shot > > colour) and thought about using the MX716 as a seperate guide
camera. > > My questions are, how would I operate the guide camera MX716
under > > the control of MaxIm? Terry Platt of Starlightxpress mentioned
to me > > that I can use both the MX716 and SXV-9C as USB connections.
Would I > > select under camera SXV-9C and guider Sar2k MX7/9 or SX MX7/9
> Use SXV-H9 for main and SX MX7/9 USB for guider.
> > What selection would I select under Control Via ( SX COM1,camera
> > relays, com1 or telescope)? My G11 with older gemini requires a
relay > > box to protect the electronics, would I still need to use the
star2k > > and its relay box?
> Select SX COM1 if you are using a Starlight Xpress relay box (the
> STAR2000 dongle should work in this mode). If you have
established a > link to the Gemini mount in the Telescope Control window, you can
select > Telescope instead.
> Doug George
> Diffraction Limited
> Makers of Cyanogen Imaging Products
> 100 Craig Henry Drive, Unit 106,
> Ottawa, Ontario, Canada, K2G 5W3
> Phone: (613) 225-2732
> Fax: (613) 225-9688
Thank you for the settings and I will try them all out to see what
works best. I have been reading some recent posts in regards to
MaxIm with the SXV-9 camera and hope by the time I get this camera
the bugs will be worked out for all. I enjoy very much using MaxIm
for image capturing and guiding.