#25332 Apr 29, 2005
outstanding info Rainer.
Thats gonna be very helpful as long as the clearance is consistent from
one mount to the next.
I may have just the thing to solve the problem ..
" Adhesive shim stock " I have a roll of copper shim stock ( more like
heavy duty foil ) that is .0015 " thick. The reason I think this may
work is that once in place it should be incompressible and since it is
copper it will hopefully act like a bushing.. As for it possibly
causing binding in R.A. as Paul mentioned.. I usually remove the
P.scope once I have the alignment nailed..
If this works I'll report back..
On Apr 29, 2005, at 3:48 PM, Rainer wrote:
> Hi Jim,
> There is about 0.01" in diameter left between the polar scope and the
> RA axis bore.
> regards Rainer
> Yahoo! Groups Links
> .. .To visit your group on the web, go to:
> .. .To unsubscribe from this group, send an email to:
> .. .Your use of Yahoo! Groups is subject to the Yahoo! Terms of