Messages & Notes From
pcb-gcode

0.2mm thiner traces
.015" end mill 1 pass around traces
1/8 inch adapter for Bosch router motor
1 pass cut,
10-MSOP impossible ????
#10: Need the ability to rotate board X and Y output, and reverse X and/or Y axes.
#18: Combine short straight segments to red uce file size.
#18: Combine short straight segments to reduce file size.
#19: Need Nxxxx numbers on generated G-Code .
2 problems with filemb.nc generation
#20: ALPHA-3.3.3 ONLY: No Z com mands in drill files.
#20: ALPHA-3.3.3 ONLY: No Z commands in drill files.
20 Degree 0.1mm Carbide Engraving Bits
#21: Need to be able to use a drill rack fi le for drill sizes.
#22: Need multiple passes for the milling l ayer.
#22: Need multiple passes for the milling layer.
24000+ micro carbide drills and routers for sale
2mm X Offset halfway through Milling [1 Attachment]
3.6.0.2 Showstopper bug (Windows only?)
3.6.2.4. is missing
#3: Drilling sequence needs to be opt imized.
#4: Coordinates for the bottom side o f the board are negative.
#5: Tool change code may be incorrect .
60 degree half lip cutters, what tip size?
#7: Parse error in print_arc_info using Mach setup
#8: Profiles aren't listed on the G Code Style tab
#8: Profiles aren't listed on the GCode S tyle tab
#9: Version shown on the setup screen isn't correct.
a big thank you
a few small things
A little help with understanding
A need of advice.
A side topic but...
Able to see some of the traces in mach3...
Absolute beginner has questions.
Adding sequence numbers to each line of gcode
adjustment to set spindle rpm
Adventures with 0.032 (thin) PCB
Advice on settings
Advice on SMD milling
Albert's Pictures.
Alignment for drilling only / viewer only shows example
All messages twice, message for the group owner/moderator
[Fwd: Alpha 3.3.3 test]
alpha feedback
ALPHA - Use at your own risk - uploaded
aluminum clad boards
Amana IN-Groove bit set Other bits.
Amana IN-Groove bit set Other bits.
'fishtail' cutter
'prefer climb'??
"Excuse me... carving through..."
"G" Code Generation
"Illegal phase 0 in main program" error
An autoleveling program
An experiment in direct imaging
An I in the right place?
announcing PCBGCODE.COM and PCB-Gcode-Wizard software
another newbie
Any reports on new Precisebits engraving bits
Any way to remove excess copper?
Anybody use Proteus?
Anyone have some large Gcode files for me to test?
Apologies if not the right place
Asunto: Autoleveler on tb6560
ATC spindle
attention Mark Vaughan Engraving cutters
Auto-leveller link broken?
Auto-Level a PCB ????
Auto-Leveler???
Auto leveler - Spot drill holes?
Auto-leveller link broken?
Auto-leveller -- another IMPORTANT fix revision 66.
Auto-leveller didn't work
Auto-leveller link broken?
Auto leveller not exporting files
Auto leveller Solved!
auto levelling error Unknown identifier 'ISO_MIN'
Auto pcb-levelling plus a few other things...
Auto-PCB Levelling ... VERY EARLY alpha2 release
Autolevel and Mach3 - Router bits
Autolevel and Mach3 - Router bits
Autolevel function with Linux CNC
autoleveler limitations?
Autoleveler not running
Autoleveler on tb6560
Found Bug! (was Autoleveler samples outside board area)
autoleveller and double sided pcb whith plated holes...
autoleveller.co.uk issues...
UPDATE: Autoleveller first try
Autoleveller going too deep
Autoleveller input.
Autoleveller problems
AutoLeveller R68 Observations and Queries
Awesome news, and delays
b# files
Back again to AutoLeveller Function
bad bot and top nc files drill is OK
ballscrew bellows covers
bed leveller running with EMC2, works great with a little effort...
Before you go out and buy a CNC mill for the sole purpose of PCB's!
Best Tool for milling?
Best way to align double sided board
BETA-3.2.5.9 is available
BETA-3.5.2.10
BETA-3.5.2.11 available
BETA-3.5.2.4 available
BETA-3.5.2.8 Available - Preview fixes
BETA files, a request for intermediate to advanced users
Beta testers needed
Beta version issue
Bit for cutting paste stencils in 0.005-0.02" aluminum/brass/steel?
Bit is going in deep
Need a bit recommendation..
Bit saving feature request
Bits and Cutters
Board em 0;0
Board Flip
Do you mill your board outline or cut it another way?
border cut?
Borders?
Boring holes
Bosch Colt won't make 1/8 collets....ever
Bottom and top boards
Boundry
brain dead install
brd file to G code
broken cutter:-Unintentional Email-
Broken pcb-gcode viewer and
Budget spindle comparisons
Drill Depth Bug
Bug reports and Feature requests - now is your chance
Bug report in Beta 3.1.1
Bug Reports and Feature Request - now is your chance
Bug reports and Feature requests - now is your chance
Bug reports/Discoveries
Bugs squashed, Features implemented
Burring
Calculating Isolation Distance
Calibrating depth of bit or Z axis?
Calibration routine
Can´t find pcb-gcode-prg .scr
Can´t find pcb-gcode-prg.scr
can't find drill size - error
Can't find fileswhen ulp run
can't get trace outline gcode
Can't open 'storage.nv' Permission denied?!?
Can G-Code convert any Gerber files ???
Can not configuring EAGLE
Can pcb-gcode be modified or upgraded to drill and route the holes and slots?
Can pcb-gcode be used with other layout programs?
can pcbgcode ULP ignore ground fills?
Can you help defray the hosting costs of pcbgcode.org?
Cannot find Milling file, and other noob questions-RESOLVED
Cannot find Milling file, and other noob questions-RESOLVED
Carbide Vee bits
Ceramic bearings
Ceramic end mills
Change drill size (eagle question)
Cheap solution for PCB's
cheapest PCB service?
Chip Breaker bit
Circle in pcb g-code
Circles on milling layer in eagle
circuit board milling problem
Clearance Requirements on Small Components
RE%3A CNC 3020%3F - A simple and free alternative to Mack3.
CNC isolation routing
cnc software program
CNCPRO post processor
Collet adapter?
Colocar board na posição 0,0
Combine etch/mill/text files
Combining drill and bottom etch after PC Gcode Wizard?
Combining/Nesting gcode files
Compatibility release and previewer tweaks
compiling the code
component grounds
component grounds
Component Pads on PCB too small !!
Configuring to use IJ format for G02/G03 arcs
Confusion on setting up axes
Controller Software
Controlling drill sizes
thermals + Cool-Amp
Copper/flood restrict layers
Copper oxidization
Copy Library Part
Current options for Auto_levelling
Cut 'inside' pads rather than around them for solder .paste stencil
cutter lifespan, lubrication, and best feedrates?
Tiny battery, was Cutting 0402 packages
Cutting 0402 packages & PCB G-Cod Revisions
Cutting bits
cutting glass, and large Eagle projects
Cutting out the board !!
Cutting out the border?
Cutting Outline?????
Cutting Plexiglass
DC jack milling path missing when convert into GCode
default drill settings wreck board!
Default extension (.nc vs .ngc)
*** Default/starting point for PCB-GCode settings ***
Denis Casserly
Depanelizing
depth and speed suggestions
Design Rules, track and pad sizes (Was: Trace thicknesses)
diferent questions
Different isolation for different signals
different questions
Different size drill holes
Digest Number 52
Digest Number 820
{Disarmed} PCB Milling tutorial
Do you mill your board outline or cut it another way?
Documentation?
Don't stuff beans up your nose
Tips for double sided PCBs
Double sided PCB with pcb-gcode video
Double sided PCBs roll-call
Downtime on Thursday
Dremel motor 'accessory' collar threads
Dremel tools and spindles
Dremel versus HF mill drill
drill alignment
Drill and milling into one file ?
Drill Bits
Drill Depth Bug
Drill Doctor as carbide bit grinder
Drill (drl) File Problem - "Drill size not found"
Drill file error
drill file no Z
Drill file problem
drill file troubles
drill preview?
Drill Tip Length
Drill Tool Change
Drill tool path problem with movement at Z0
Drilling a board has accumulative errors-still
Drilling a board has accumulative errors-still
Drilling file Error
SV: SV: Drilling GCode is having a bug in version 3.5.2.11
Drilling issues.
Drilling issues.
drilling larger holes
just the drills ma'am....
DRU files for homemade pcb cnc
dumb question.
During the setup in Eagle 5.6, the Gstyle list is .empty
Dwell after Z has reached cut depth...???
Dwell Times
.DXF>Eagle
DXF import to Eagle?
DXF to Gerber Translate Program
pcb-gcode and eagle 8 problems
Eagle 5 on Ubuntu (big board hack)
Eagle 5 on Ubuntu (big board hack)
Eagle 6.1.0 and autoleveler 3.5.2.11
Eagle 6.5 Text Box
Eagle 7.7 compatibility?
Eagle 7.10 & PCBGCODE 3.6.0.4
EAGLE acquired by FARNELL
Eagle > pcbgcode & eagle > DXF > Autocad > DXF> SheetCAM = board
eagle and pcb-gcode on linux box
Eagle changed their internal units in v6
Eagle cuestion
Eagle download
Eagle/Fedora5/pcb-gcode
Eagle Library 'ADD'
*** SPAM *** Eagle Metric/Imperial
Eagle-polygons-rectangles
Eagle Question - making logos
SV: SV: Eagle Saves
Eagle size limit
eagle *.tap files to mach 3
EAGLE v6 Support Poll
Eagle Version
Eagle Version 4.90.5 Mac OS X
Eagle Version 4.90.6 for Mac OS X
Eagle Version 6.0
Eagle Worries
Eaglecad V6
Easier way?
Editing emc.pp for users of EMC2
EDM PCB
Eee Dee mmm or some musings on EDM process
Eee Dee mmm or some musings on EDM process
EEEE DDD MMM
egraving bit tips
[Electronics_101] Brushless motor controller
Eliminating redundant paths to isolate Polygons
EMC and tool change
EMC G-Code loading Error
emc.pp G82
EMC2 info for Z P
EMC2 Spindle start gcode fix
Empty PCB Outline NC file
en español
Enclosure
20 Degree 0.1mm Carbide Engraving Bits
engraving close tracks
Engraving cutters
Illegal Phase Error
Error: "illegal phase 0 in main routine"
Error Illegal Phase 0 in main routine
Error in PCB GCode
Error message [1 Attachment]
Error message in Eagle
Error when enabling user-gcode.h file
Error when loading gcode file in Mach3
Error when running pcb-gcode.ulp or pcb-gcode-setup.ulp
error when starting program
Etch text
etching labels?
Everything in MM
Everything is scaled down by 2
Excellent toner transfer results!
Excellon to G-Code
SV: Excess Copper Removal
Excessive NC File Size Query?
Excessive Z when cutting board outline with arc's
Experience of depth of cut
Extract Header Drill Holes and Combine Eagle Files
Extrusion mill/Dental burrs
Fat Library
Feature request and a pp file for Kosy CNC machines.
Feature request for the pcb-gcode.
Federate 100mm max?
Feed Speed Issue
Feedrate 100mm max?
FILE_END[ALL] setting isn't at the end of the etch file
Fill include
Finally! I have done it:})
Fireball V90 and pcb-gcode make my day!
First board with pcb-gcode thanks JJ - vacuum question
First board with pcb-gcode thanks JJ - vacuum question
First board with pcb-gcode thanks JJ - vacuum question
First line in G-code blocks Mach3.
Issues running my first PCB-Gcode job in LinuxCNC
*** First PCB Using Mach3/Eagle 5.10.0 with PCB-GCode - couple of challenges ***
First post, first cut
First semi successful attempt but pads look smaller than they should be
First Successful PCB
First time user of PCB-gcode
Hi

Flexible PCB material for sensor array
Flipping the board over...
Floating spindle foot
fly cutting spoil board?
For all friends using pcb-gcode...
Forgetting Zero
Found Bug! (was Autoleveler samples outside board area)
Frappr & zapper
FW: Spindle Motor And Chuck
[Fwd: Alpha 3.3.3 test]
Fwd: Drill spot holes SOLUTION
Fwd: Help me pleace Mr. John, pcb-gcode...
g-code error!
G Code optimiser
G-Code optimizer
G - Code program
G-code to HPGL converter
G-Code use with SprintPCB by Abacom
G82 - No Z-xxx, Fxxx, Rxxx
Gaps in milling
GCode and Eagle CAD
gcode-default.h
gcode for Mach2?
Gcode generated on a Mac lacks linefeeds
Broken pcb-gcode viewer and
gEDA PCB and PCB-Gcode
General starting settings for DrewTronics 60 deg bits
Generate bottom outlines?
generated GCODE way to big
Generating G codes with G02 and G03 for arcs
generating milling data for an outline
Gerber, Gcode, routing traces
Gerber import to Eagle?
Gerber to eagle convertion?
Gerber to G-code?
German language pcb-gcode-setup for 3.5.2.11 .available
Get symbol to output to top text file
Getting closer.
Having problems getting started
Good ULP and Script Files
Google Sketchup CAD Program
Gratitude, honor, optimizers, curves, etc.
Greetings for 2011! + PicoCNC interface board info?
Greetings for 2011! + PicoCNC interface board info?
Groun Plane
Group activities
Gscew
Gsuite v1.2 free gcode tools
Gsuite v1.2 free gcode tools
Gtime
Hack to stop board border cutting.
Handling pour areas
Harbor Freight bit collection .... was tooling
Hass VF-3 Settings
Having problems getting started
Height probing for PCB isolation routing
Hello
Hello all, and a beginner question
Hello to the group.
Help: Gerber File to G-Code Conversion
Help GH code
Help modifying profile files
Help with pcb-gcode.ulp
Hexapod Robot CNC router
Hey Andrew, are you still selling bits?
HHHHHHHEEEEEEELLLLLLLPPPPP me please
Hi to the group
High speed spindle - was Photo's of my first PCB - success!!
High speed spindle - was Photo's of my first PCB - success!!
Hit a wall...
*** Hold down for PCBs ***
holes or slots in milling layer
How about an option to mill the cream layers?
How long are all the track cuts on a pcb
How not to etch boards
How pcb-gcode works
How started and use my new CNC for PCB drilling
How to add a G-command line after the tool change command?
How to cut out pcb
how to find Eagle v5.12
How to include Feed rate into all FEED_MOVE* .commands?
how to make signs
How to rotare the PCB layour of 90 degree
How to rotate boards?
How to stop for the tools changing
I'm looking for a couple of guinea pigs
I can't run PCB-Gcode on Widows VISTA
I could use some assistance
I found the problem, I think ( Drill file)
I need pcb layout for 4 axis Stepper motor controller
I need some setting recommendations
ΣÏ.εÏ.: CNC isolation routing
Need your ideas for PCBGCODE.COM
Ignoring certain nets
Illegal Phase 0 error
Error Illegal Phase 0 in main routine
Illegal phase 74 in main routine
Illegal Phase Error
Imagem PCB to GCode
Improvements to the Setup screen and other changes
in spanish
inconsistent results
Incorrect Milling File Generated...
Fwd: Increasing space around traces / spacing inconsistent [2 Attachments]
Incremental Positioning
Info on SW for LPKF ...
Initial Z depth bug on milling layer
brain dead install
Installation of pcb-gcode on Mac
Installing Newer PCB-Gcode
installing PCB-Gcode on ubuntu
installing PCB-Gcode on ubuntu
Installing pcb-gode, Help!
introduction
Introductions first....
Is Eagle version 7 any good?
Is the group open to non PCB-GCode but Gcode related subjects?
Is there a setting that enables routing of the hole.. CLAIRIFICATION
Is there a setting that enables routing of the hole (to scale) in the copper?
Is Vector output possible?
Isolation Mill Ends
Isolation Settings
Issue setting up 3.6.0.2
Issues running my first PCB-Gcode job in LinuxCNC
It was there all the time...
Java path
javaw.exe error
javaw.exe file not found
Javaw.exe issues
javaw.exe not found - help
Jumping ship..
Just checking in with a question
Just saw this...
Just starting
just the drills ma'am....
Kicad workflow
Laser control question
new to group/cutters, Lasers, LEDs and Fluorescent tubes for PCBs
lead scres and mill dust
Leveller -- tool change and auto-calibrate?
Library stuff
Line Feed Formatting Help
line numbers
Linegrinder on OSX/Linux
LinuxCNC not responding to probe all of a sudden
looking at photos
Looking for advice milling double sided board
Looking for feedback on 3.6.0.3
Low cost machine
LPT PCI card
M03 and Spindle speed
M06 Tx in TurboCNC. And maching sequence.
M0KHZ CNC build
Mac to PC, Drill Files Kerfuffle
Mach 3 compatible driver with encoder
Mach3's Gcode From PowerPCB(pads)
Mach3 Art Code error 9991 with pcb-gcode and auto level
Mach3 dry run
Machine capabilities.
Machines Not Showing
machining projects
Made with pcb-gcode
Major Bugs and/or Programmer's Logic Errors
Make route file start at first cut
Make Yahoo stop it!
Making auto-level work with plated throughholes
Making double sided boards
making plated vias
Making solder paste masks
Making solder stencils
Making vias
MAXCN
MaxNC 15 CL2
MAXNC CL
Maybe some else can learn by my folly:})
Melting Copper During Etching
Melting Copper During Etching (should be 'During Engraving')
Member for awhile. Just started using pcb-gcode. A few questions.
Membership, Posting, etc.
Merch
Micro Air Die Grinder Spindle
Micro air-grinder?
Micromouse Sensors TALOS TSL262R
Mill file is not being generated correctly
mill file question
Mill layer What happened?
Mill layer What happened?
mill pcb´s
Mill trajectory with PCB-GCODE
Milling a board outline
milling circuit board speed
Milling contour board with arcs or curves
Milling cutter offset..
Milling Double Sided boards ?
milling holes
milling holes
milling in steps
Milling layer 46
Milling Layer Data
Milling PCB's with intelligent ground planes and defineable rubout areas.
Milling PCB outlines
milling problem solved
milling reasonable populated PCBs
Milling text placed on Milling Layer.
Milling Text Into Top Layer
Milling text placed on Milling Layer.
Milling time guesstimation question
Mirror problem
Mirror Mirror
Mirror problem
Mirror problems
Mirroring with gcode
Mirroring with gcode (micro hi-jack)
Misregistration - Why ?
Missing images
Modding the drill cycle ?
Move text to milling layer
Move the origin in Eagle?
Moving goal post/traget
Multi pass
multilayer boards
Multipass milling
Multiple runs
My apologies for the recent offensive message
My first board and TY to JJ
My first eagle->pcb-gcode->mach3 PCB
My first PCB with pcb-gcode.
Not my little homebrew PCB milling machine
My little pcb-gcode sorter
My new DIY CNC [3 Attachments]
NCPlot Free version
NCPlot v1.1 Great g-code viewer / editor
NCStudio
Need a bit recommendation..
Need a couple of alpha testers
Need a couple of experienced Windows users to test something for me
Need a retangule pad.
Need free gcode back plotter for Mac
Need help
Need help with milling.
Need info on how you use auto-leveling
need small small PC board made
Need some help please, no parameters G82 drill files ?
need test gcode files for new PCB Gcode viewer/cleaner/optimizer
Need TOOL_TYPE variable depending on which type of mill file to bw written
Need trouble shooting suggestions
Need your advise guys.
Negative numbers on X axis
Nets
New autoleveling software
New Autoleveller .8 released
New Beta available, it's featureful
New beta release 3.3.2
New Beta version available
New Eagle user
New Etching Tool
New features on the way
New file uploaded to pcb-gcode
New guy
New here...
New High definition video
new install, but no G01 code
New member
New member. Gerber, Gcode
New member here; Milled my first PCB this evening
SV: New member: In search of the tcream and bcream layer option for SMT stencil
New Member Intro
New member, new questions
New old guy needs fine pitch help
New on pcb milling,
New on the list and have a few questions
New PC for CNC machine running EMC2
New poll for pcb-gcode
New problem...
New release coming soon!
new to group/cutters, Lasers, LEDs and Fluorescent tubes for PCBs
new to group/cutters, Lasers, LEDs and Fluorescent tubes for PCBs
New to pcb-gcode, just joined yesterday.
New to pcb-gcode, just joined yesterday.
New to PCB Milling
New to the forum - question on blank screen
New to the group
New User and some questions.
New version released!
Newbe
Newbie asking help
Silly Newbie question
*** Newbie Questions - Probotix V90 ***
Newbie to the Group!
Newbie with a question
Newer pcb-gcode and z for drill
Newer version?
News for Dec-2005
Next Level of Learning.
No eagle pcb software
No Gcode being generated..
No initial Z movement in "Mill" layer GCode
No Z axis G-Code
No Z axis code generation for holes to be drilled
No Z axis G-Code
Not cutting deep enough?
Not generating gcode to mill bottom and mixing up top/bottom- help!
not line numbers
Not my little homebrew PCB milling machine
Nothing generated for the milling layer?
Numbering lines
of topic - USB Breakout board
Off topic: test
Off topic Eagle
Offset Problem
On depth of cut
On milling holes
On spindle speed and linear feed rate
Optimized drill path coming soon!
Optimizer for pcb-gcode question
{Spam? 5} Optimizer ready, I need some beta testers
origin problem
OT 3D CAD SOFTWARE
OT? Anyone know about this cicuit printer?
[ot] Chiplotle HPGL API
OT: Easier way to make pcbs: Direct Inkjet printing
OT: My list of Yahoo Groups
OT news:})
OT: pcb-gcode author looking for work
Outlines offset
Output still too big
Depanelizing
parse error
Path optimisation
Path optimizer
pcg-gcode wizard (by Paul Kiedrowski) and Windows 7
Pause between outline passes
Payback time ;-)
PC board pictures
*** PCB Alignment for 2-sided routing/drilling ***
PCB 'moves'
pcb-code and the Lumenlab micRO
PCB Drill Bit Size's & iso passes ? - newbe help please
PCB Drill Kits and Starter Kits
How started and use my new CNC for PCB drilling
pcb engraving machine
PCB Etching Issues
PCB G_Code
pcb g code to gerber
New file uploaded to pcb-gcode
pcb-gcode 3.5.2.11 problems
pcb-gcode-3.5.2.11.zip The Requested document not accessible
pcb-gcode-3.6.0.4 win7 starter can't run pcb-gcode-setup.ulp
pcb-gcode and Altium
pcb-gcode and eagle 8 problems
PCB-Gcode and Eagle in Vista
pcb-gcode and gcode-02
pcb-gcode and grbl
pcb-gcode and linux
SV: SV: SV: PCB-GCODE and Lumenlab's micRO M3
PCB-Gcode and TurboCNC
PCB-GCode Beta Release 3
PCB-gcode bug: G02 without G90.1
pcb-gcode complete removal of the copper
pcb gcode download
pcb-gcode download link?
PCB Gcode - Eagle registration holes
pcb-gcode error
pcb-gcode for EMC and a question
PCB-GCODE for Gerber/HPGL
Pcb-gcode for me still doesn't work completely...
pcb-gcode group
PCB-GCODE locks up
PCB Gcode not keeping settings
PCB-Gcode on Linux or Windows
pcb-gcode problem ...
pcb gcode settings dont save
pcb-gcode-3.6.0.4 win7 starter can't run pcb-gcode-setup.ulp
pcb-gcode-setup problem
[PCB-gcode] silk screen plotting?
pcb-gcode single pass suggestion
pcb-gcode usage
Broken pcb-gcode viewer and
PCB-Gcode with KCam
pcb-gcode with Osmond Quartz??
PCB-Gcode with RepRap
pcb-gcode-wizard
PCB GODE Java problem
PCB layout software.
SV: PCB Leveller -- 2.0alpha1 IMPORTANT FIX
X-Carve PCB Milling
PCB milling bits
PCB Milling Forum(s)
pcb milling how to
PCB Milling Techniques
{Disarmed} PCB Milling tutorial
PCB probing and MACH3
PCB router bits
PCB software - recommendation ?!
PCB to GCODE error
PCB Tutorial link
pcbgode config not showing up in eagle 5.7
pcg-gcode wizard (by Paul Kiedrowski) and Windows 7
Perrenial search for the "best" bit
Personal aside
Phenolic PCB supplier?
High speed spindle - was Photo's of my first PCB - success!!
pick and place anyone?
Platinen nicht fräsen sondern schaben und ätzen
Platinen nicht fräsen sondern schaben und ätzen
please unsubscribe me
Polish users?
Poll results for pcb-gcode
Polygon errors...
Poor results with Dremel engraver bit
Portuguese translation of pcb-gcode!
Position of board
Positive GCode.
possible bug
Possible Laser diode application to milling a board was Future Features and other administrivia
Preview on a Mac
Preview viewer
Fix for previewer needs testing
previewer problem
Probing.., anyone got a nice simple design for a probe and approriate EMC settings ?
Problem etching
problem getting 3.6.9.4 running
Problem milling circle
SV: Problem starting PCB-Gcode Drill_sizes.h cannot be opened despite it exist
Problem with AutoLeveller
Problem with board size and pcbgcodesetup.
Problem with drill files
Problem with milling operation
SV: Problem with pcb-gcode and tools change
Problem with pcb-gcode in Eagle
problem with scr file
Problems Setting Up PCB-GCode.
Problems with bottom board
Problems with isolation
Problems with McAfee product
Product still suppoerted?
Profile changes not applied to gcode
Profile for Piranha FX CNC Router
Prognosis
program MPASS
Proxxon IB/E vs. Dremel clone
Pyramid, V-Cutters, Two-Flute tool bits
Python For Windows Version to Run etch_z_adjust2.2.py?
Question about milling speeds
Question about the "mill" file
Question for somebody smarter than me!
Question on how other people handle this!
Questions about best cutting tool for my mill
Quick Autoleveller demo/tutorial
*** Quick Mach3 Question ***
Quick note for users in the USA
Rapid speed
Readjusting Z height
real_to_string ERROR
Ref: Drilling problem
Remove border from g-code?
Remove re-tool steps / Optimize paths
Replacement spindle
RFR (Request For Requests) and Thanks
right drill for PCB milling
Rough edges on PCB traces
Router Machine
routing board out of panel
routing problem
Rubout layer?
running setup in pcb gcode
Runout: Measuring.
RV: Thanks
Safety of milling FR-4
Sale on PreciseBits PCB etching bits
SamCoVT's stencil cutting ULP
Saving gcode as .gcd
Can´t find pcb-gcode-prg.scr
scratch during drill
search question
Search seems to be broken
Securing PCB stock to the mill -- carpet tape
Securing PCB stock to the mill -- carpet tape
Securing PCB stock to the mill - suggestion
segments
sequencing
Set name of pcb-gcode's fill polygons to match GND?
setting number of passes (i.e making only one pass)
setting number of passes (i.e making only one pass)
Setting up the Auto Leveler probe - Help needed
Settings for the Drewtronic bits
pcb-gcode-3.6.0.4 win7 starter can't run pcb-gcode-setup.ulp
Sherline users-Air Spindle
Shopbot and PCB-gcode w/auto leveler
Shopbot gcode
Showing off
Σχετ: CNC isolat.ion routing
Σχετ: CNC isolation ro uting
Σχετ: CNC isolation routing
Σχετ: Σχετ: [pcb-gco de] CNC isolation routing
Σχετ: Σχε Ï„: [pcb-gcod e] CNC isolation routing
silk screen plotting?
SilkScreen Mill
Silly Newbie question
Slivering problem
Slivers between pads
Slots/elongated holes
SV: small router bits?
SMD and PCB-GCode
SMD PCB - questions
So after getting my mill running...
SOIC14 & 1206 SMD - doable? (after some good starter settings)
Soigeneris.com 5 year aniversay contest week 4 winners!
Solder Mask
Soldering double sided board under the headers/labeling question
Soldering double sided headers/labelling PBCs
Soldermask efforts
Some drills went in the wrong location
Well, some progress and some questions:{(
Something a little different
Sony Robokid Robot Conversion to PCB Mill
Spacing problem on routing
*** SPAM *** Eagle Metric/Imperial
{Spam? 5} Optimizer ready, I need some beta testers
[SPAM] Milling Text Into Top Layer
Spark Erosion
SpeakJet Shield board
Specifying cut direction for gcode millling
Speed Controller
Spindle Motor And Chuck
Spindle on - Mach.pp
Spindle speed versus Feed Rates
spot drill data missing (v3.6.2.4)
Auto leveler - Spot drill holes?
Spring loaded engraving tool
Spring loaded engraving tool - example
spring loaded tools
Stand alone?
start and end milling is not the same ??
start-up assumptions confirmation?
Welcome, and State of the Code
State of the GCode, Welcome, and Thanks
Status of auto-leveling now
status on using only 2 tool sizes, one pass per tool?
Steep learning curve, potential costly mistakes
Stepper Motor Driver
Stop viewer opening?
Strange "can't open /settings/pcb-defaults.h" error in Eagle 6 under os x 10.6
Strange effect
strange probe grid size whith leveller
First semi successful attempt but pads look smaller than they should be
SV: SV: Drilling GCode is having a bug in version 3.5.2.11
SV: SV: Eagle Saves
SV: Excess Copper Removal
SV: Leveller -- tool change and auto-calibrate?
SV: Library stuff
SV: New member: In search of the tcream and bcream layer option for SMT stencil
SV: SV: SV: PCB-GCODE and Lumenlab's micRO M3
SV: PCB Leveller -- 2.0alpha1 IMPORTANT FIX
SV: PCB router bits
SV: Problem starting PCB-Gcode Drill_sizes.h cannot be opened despite it exist
SV: Problem with pcb-gcode and tools change
SV: small router bits?
SV: SpeakJet Shield board
SV: SV: Eagle Saves
SV: SV: SV: PCB-GCODE and Lumenlab's micRO M3
SV: SV: SV: SV: small router bits?
SV: SV: SV: PCB-GCODE and Lumenlab's micRO M3
SV: SV: SV: SV: small router bits?
SV: SV: SV: SV: small router bits?
SV: SV: Tutorial for how to use "Auto leveller"
SV: Tutorial for how to use "Auto leveller"
SV: Unable to open include file
T-Tech PCB Machine FS
T-Tech router modifications
T-Tedh router modifications
Taig problems - still
target
Target Drill file
TB6560 CNC control board
Teething
Tekcel Router
Tell me if I have this right
Temporary moderator needed
Off topic: test
:: testing Gcode is this normal ?::
Move text to milling layer
Text in Eagle
Text in pcb-gcode
Text Milling Problem
Text under Eagle
Thank You
Thank You John
Thanks, Art!
Thanks, Art!
Thanks JJ
Thanks JJ/ Bernie Walker's question
Thanks to Art Eckstein, your tireless group moderator
The Drilling file seems to Be unlogical
The other pcb-gcode site
Thermals
thermals + Cool-Amp
Thread Mill Wizard
tiag mill .pp file
Time to acknowledge donors
tinning prep that worked
tinning prep that worked
Tips for double sided PCBs
Tool "odometer"?
Tool Change GCode
Tool changes
tool offsets (G43 commands) for EMC
Tool ring
Harbor Freight bit collection .... was tooling
top.drill.tap has no drill holes.
trace offset problem
Design Rules, track and pad sizes (Was: Trace thicknesses)
Trace width
Track and pads joined
Track numbering?
tracks ethching
Translator...
Trouble with PCB-Gcode-Wizard
Trying to simply etch with isolation
Turbocnc tool changes- a mystery
SV: Tutorial for how to use "Auto leveller"
Typical engraving and drilling depths?
Unable to detect circular milling area
Unable to open include file
Uneven / Distorted PCB laminates
auto levelling error Unknown identifier 'ISO_MIN'
unknown identifier ISO_MIN included c:/program files/eagle-6.2.0/ulp/pcb-gcode
(unknown) [Moderated]
please unsubscribe me
Up and running
Upside down?
USB interface
usb sensor board has incomplete output
user-gcode.h help
user-gcode.h modification help needed
Using offsets- the correct way?
Using only One Bit for Drilling (Syntax Error)
Using only One Bit for Drilling (Syntax Error)
using optimizer in Vista, and on drill files
Using Pcb-gcode with proteus
Using pcb-gcode with a 2 axis mill / router
Using pcb-gcode with Linux
Using Pcb-gcode with proteus
Using Roland MDX-20 and RML
Using the Roland Modela - .NC to MDL
Using Trim Router
UV Laser?
V cutter tip vs. spacing between tracks
Pyramid, V-Cutters, Two-Flute tool bits
V engraving bit
V3.1.1.1
Vacuum Chuck
Vacuum Fixturing
Vacuum question
vacuum system
Various newbie questions on tips / speeds / software etc
Ver5.0
Version 3.6.2.0 error
version question: Release 3.3.3 or Beta 3.5.2.11
Very Impressive PCB Milling!
Fix for previewer needs testing
VIEWER HELP
Viewer problems
Vinyl/paper cutter PCB machine
Visualizing drill holes
vizualizing gcode with CncSimulator
Warning message if everything can not be cut?
Warning : unknown g-phase
way too much Z movement
Web page - how to
Weirdness between PCB-Gcode and G-Code Wizard.
Weirdness with the Viewer
Welcome all!
Welcome, and State of the Code
Welcome, Message delays, Future Features and other administrivia
Welcome, the State of PCB-GCode, and Thanks
Well, some progress and some questions:{(
What cad software is everyone using?
What do you guys use to deburr/polish your copper board post mill?
What is in the Files section now, and a new Beta is available
What is Mirror for, Applying paste solder
what is the correct path?
What is the purpose of the drill hole in the bottom right?
What software?
What spindles and cutters should i use??
Which gcode flavor...
which one is good for PCB design of Xilinx Spartan XC6SLX75-2FG484C
Who uses pcb-gcode?
Why Do I Have Double Passes?
Why is M06 being included in the GCode for the bottom etch?
Why is pcb-gcode trying to etch the outline of my board?
Wine for Windows on Linux
Winodows 8
Working on a mac
write letters.
x axis jump
X Axis Origin Shift During Milling
X-Carve PCB Milling
yet another pcb-gcode optimizer
Yet another success story for pcb-gcode, what a .huge time saver!
Z-down or Milling Depth?
Z-feedrate is only for Drill?
Zero position
zero setting(point) is different on Etch and drill gcod e
zero setting(point) is different on Etch and drill gcode
zero setting(point) is diffrent on Etch and drill gcode